Sitemap | RSS | XML
Industry News

How to solve the deviation of stainless steel mesh belt

2021-01-18
Not long ago, many users reported a problem to our customer service staff, that is, there are sometimes deviations in the use of stainless steel mesh belts. If the stainless steel mesh belts are deviated, what aspects should be checked and repaired. This is the most worrying issue for consumers. What should we do?






We can check the degree of misalignment between the horizontal centerline of the drum and the vertical centerline of the stainless steel mesh belt. If the misalignment exceeds 3mm, the lengthened mounting holes on both sides of the roller set must be used for adjustment. Check the error value of the two planes of the main shaft box and tailstock mounting bearing seat. If the error of the two planes is greater than 1mm, the two planes should be adjusted to the same plane. If the stainless steel mesh belt deviates from the right side of the drum, the bearing seat on the right side of the drum should move forward or to the left. If the conveyor belt shifts to the left side of the drum, the bearing seat on the left side of the drum should move forward. Or the right bearing seat moves backward.

The solution for the deviation of the stainless steel mesh belt is here, I hope it will help you. If you know more news and information, or if you need it, you can contact our customer service staff or visit our website. We will provide you with quality service. Thank you for watching. See you next time.